Manifolds
-
Remote Mount 2-Valve Manifolds
▪ Working pressure up to 6000 psig (414 bar)
▪ Working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
▪ Orifice: 0.157 (4.0 mm)
▪ Two-piece stem design: Upper stem threads cold rolled and lower stem hardened for high strength and smooth operation
▪ Upper stem thread lubricant isolated from system media Linear instead of rotary motion of the rising, non-rotating stem minimizes packing abrasion and reduces the friction between the seat and the tip
▪ Safety back seating seals in fully open position
▪ Steady and durable fastening of the handle by handle set screw
▪ Every manifold leak tested at rated working pressure before shipment
▪ Different constructions of 2-valve manifolds for option
-
Instrumentation 3-Valve Manifolds
▪ Working pressure up to 6000 psig (414 bar)
▪ Working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
▪ Orifice: 0.157 (4.0 mm)
▪ Upper stem thread lubricant isolated from system media Linear instead of rotary motion of the rising, non-rotating stem minimizes packing abrasion and reduces the friction between the seat and the tip
▪ Safety back seating seals in fully open position
▪ Steady and durable fastening of the handle by handle set screw
▪ Every manifold leak tested at rated working pressure before shipment
▪ Different constructions of 3-valve manifolds for option
-
5-Valve Manifolds
▪ Working pressure up to 6000 psig (414 bar)
▪ Working temperature:
PTFE packing: -65 F to 450 F (-54 C to 232 C)
Graphite packing: -65 F to 1200 F (-54 C to 649 C)
▪ Orifice: 0.157 (4.0 mm)
▪ Upper stem thread lubricant isolated from system media Linear instead of rotary motion of the rising, non-rotating stem minimizes packing abrasion and reduces the friction between the seat and the tip
▪ Safety back seating seals in fully open position
▪ Steady and durable fastening of the handle by handle set screw
▪ Every manifold leak tested at rated working pressure before shipment
▪ Different constructions of 5-valve manifolds for option
